Color Optic Limited
Our products make it easier for our customers to innovate, compete and continue to drive down the cost for each industry worldwide.
Add to Cart
This is CFP2-DCO pluggable transceiver is a CFP2 MSA-compliant digital coherent optical module designed for line-side trunk DWDM data center interconnect (DCI), metro carrier, and regional/long haul applications. CFP2-DCO module adopts a common C-band flex-grid laser source providing both transmitter and local oscillator signals, calibrated to provide 100 MHz frequency accuracy, and ±6 GHz local off-grid tuning.
Supports 100 Gbps DP-QPSK and 200 Gbps, DP-16QAM modulations Flexible client side interfaces supporting: OTL4.4 signaling for OTU4 frames with G.709 FEC and OTU4/ODU monitoring; CAUI-4 signaling for 100G Ethernet with RMON counter module Interoperable staircase FEC and low latency 15% soft decision-FEC support Support for Nyquist spectral shaping and digitally compensated CD and PMD Flex-grid DWDM support with gridless tuning (100 MHz resolution) Embedded PRBS generator/analyzer for line and client interfaces and loopback of incoming and outgoing traffic Standard CFP2 form factor module outline (106 x 41.5 x 12.4 mm) Operating case temperature from 0°C to +70°C Single 3.3 V supply.
100G Ethernet OTU4 Long-haul Metro DCI 5G Backhaul
Parameter | Symbol | Min | Typical | Max | Units | Note |
Operating Case Temperature | TOP | 0 | | 70 | degC | |
Operating Input Optical Power of Signal | Psig | -18 | | 0 | dBm | |
Transmitter output power range | Pout | -5 | 0 | 5 | dBm | |
Frequency Range | f | 191.3 | | 196.1 | THz | |
Receiver Sensitivity | SEN | | | -21 | dBm | |
OSNR sensitivity | OSNR | | 19.5 | | dB/0.1nm | |
Power Consumption | | | | 24 | W | |
| |
